Tough Plumbing Problems Made Easy With This Info

Categories Plumbing

Problems with plumbing can cause problems in to home and also damage your belongings. Here are some tips on how to learn to fix problems with your plumbing.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

Use a hairdryer to thaw frozen pipes, after you shut off the water to the house. A hairdryer will gently heat the pipe and thaw the ice without causing significant damage to the pipe. Shutting off the water first means that if the pipe is broken, there will be no rush of water into the house.

If you have pipes that are clogged, try a cleaner that is enzyme based. These will utilize natural bacteria to transform sludge into a liquid that can be removed. The most highly recommended pipe cleaners are enzyme cleaners.

Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.

Be careful with putting household cleaners in your toilet. They can cause the toilet to malfunction. The debris that these cleaners leave can sit in your toilet’s pipes and harden, making them almost impossible to get rid of. If it does harden, it usually requires the help of a professional.

To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double check that there is not a splash waiting for you. Then triple and quadruple check.

Be sure that you check on your water meter when it is not being used. Then, check on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.

Before you have a plumber come out to your house, research their history with your local government consumer affairs department or agency. This will allow you to be sure that they are properly licensed and that they have not received a ton of complaints from previous clients. A contractor’s license must be in good standing and current for you to even consider him.

If you own property where the temperature gets below freezing for an extended amount of time each year, you should make sure that pipes located in unheated areas, such as crawl spaces and garages, are insulated. Pipes that are exposed to the outside elements or those that are prone to freezing, should be protected by heat tape or thermostat-controlled heat cables to prevent them from freezing.

Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.

If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

As tempting as it may be to try and save on the heating bill, keep your furnace set no lower than 55 degrees over the winter to prevent inside pipes from freezing. If you have pipes located in an excessively cold basement, consider running a space heater in the basement, but only when it can be checked on frequently.

Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.

Check for calcium and mineral deposits by turning on both the kitchen sink and the bathtub. If the volume of water is low, it may be time for you to replace pipes due to deposits of calcium and other minerals. Check the water pressure and consider calling a professional to handle the entire job.

Are you searching for a simple tip to inspect your home for slow leaks in your plumbing system? Simply take a reading on your water meter before bedtime. Upon waking the next morning, without using any water overnight, take another reading. If the reading has changed, you will know that somewhere in your plumbing system you have an undetected, slow leak.

Every so often you should check your toilet for leaks. A good way to check for leaks would be to put food coloring, Kool-Aid, or even coffee in the tank, anything that will color the water will work. You should check your toilet bowl in a little bit, and if there is color in the bowl, your toilet is leaking and the stopper and/or flush valve may need changed.

Plumbing ca be a very hard issue to deal with, but if you do some work and exhibit patience, you can help them. It just takes research and perhaps asking a plumber what to do and how to fix it properly. Put the tips you have learned to use and solve your plumbing problems with ease.