Simple Solutions To Problems With Your Plumbing

Categories Plumbing

Professional plumbing is often a very expensive service, and usually the work that is done is something that any homeowner could solve fairly easily with the proper knowledge and tools. If you’d like to start learning to solve your own plumbing problems, read on to see what you can do.

Do not put cooking oils, fat, or grease, down your drain. These fats cause clogs by solidifying in pipes. To properly dispose of fats, put them in a bowl with a lid that you can dispose of. Once it gets hard, throw it in the trash or compost bin.

You should regularly check for water damage to your bathroom floor caused by your toilet in order to save money and further complications. Feel the floor around the toilet and check to see if the floor is soft, molded, chipping, etc. Stand above the toilet with a foot positioned on each side up close to the base. Shift your weight back and forth to detect any weakness or sponginess. This will save you a lot of trouble and money if you find the issue before something horrible happens.

If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.

Run cold water in your sink when you turn on the garbage disposal. The cold water helps keep the blades sharp and can make disposal much smoother. If you use hot water, any grease that is in the disposal will turn to liquid, and sit inside of the drain, which can clog your pipes.

If you want to keep your kitchen drains from clogging up, don’t pour grease down them. As it cools and congeals it can trap other food or waste particles, which over time can slow the draining of water and even form a clog that will not be easy to remove.

Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.

Be careful with putting household cleaners in your toilet. They can cause the toilet to malfunction. The debris that these cleaners leave can sit in your toilet’s pipes and harden, making them almost impossible to get rid of. If it does harden, it usually requires the help of a professional.

One of the things that you can do to safeguard your home from any serious plumbing issues is to install a flood alarm. This is a device that will sound when it comes in contact with water, alerting you if there are any issues in a particular area in the house.

Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.

Plumbing is more than dealing with water. There are other skills needed if you want to try out plumbing. When looking at a common project like fixing water lines, one can realize the in-depth knowledge that is necessary.

Pick the drain cleaner you use carefully. Some of them contain strong chemical agents that will damage your pipes. Try to select a brand with less harmful chemicals. Some chemicals will kill the bacteria your plumbing system needs to function properly and could even be harmful to humans.

Avoid flushing cotton balls, cotton swabs and any feminine sanitary products down the toilet. Even small panty liners can cause big problems because their adhesive backing can stick to pipes and cause stoppages. Keep a small, covered wastebasket next to the toilet to encourage guests to properly dispose of used sanitary articles.

If you are starting to install a water heater and see a pipe going out from the drainage area, be sure to reconnect that pipe. It’s probably a pipe for recirculation, and that does a tremendous job of keeping your water hot without wasting water along the way.

As you can see, plumbing isn’t as difficult as you may have believed. Many plumbing problems can be solved easily with things on hand, or with a few inexpensive parts. Next time you have a problem with your plumbing, try using the tips in this article to solve it yourself!