If you’re a homeowner and have had to call a plumber to fix a problem, you know how expensive and annoying it can be. Wouldn’t it be great if you could fix your plumbing yourself? Well, it might be easier than you think! Read on to find out how.
If you are paying someone else to do the plumbing in your home be sure that they are licensed in your state to do that work. Some people who have little or no knowledge of plumbing will try to pass themselves off as a pro. So you can see the importance of checking to see if your plumber is licensed. You should also see if you can find positive testimonials about the plumbers work.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.
Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.
Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition, but can be avoided if you know how to dispose of items correctly.
Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.
If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.
Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don’t enter your home. Doing this periodically will also help you to catch problems before they become serious.
Do you have a frozen drainpipe? You can use a garden hose to thaw it out. First of all, remove the trap from the drainpipe and insert the hose until it will not go any further. While lifting up the other end of the hose, pour hot water down it. Keep pouring hot water down the hose until the drainpipe thaws. To save time with cleanup, keep a bucket underneath to catch the water that overflows.
Try not to use drain cleaners if you can. Drain cleaners contain very corrosive chemicals that can damage pipes if used too frequently. Rather, if you have a blocked drain, consider having a professional plumber come out to diagnose the cause.
Ask before the plumber comes out if they charge for the consultation. In order to quote a project, the plumber has to come out to inspect your particular issue. It is standard to charge for the consultation appointment but the prices can vary wildly. Ask upfront so that you aren’t surprised by the total.
If you have sewage backing up into your toilet, this is due to a blockage in the branch line connecting the main line and sewage line. If you cannot clear the blockage, you will have to contact a professional, who will run a snake along the line to clear it.
When getting an estimate from a contractor on a job, make sure to ask how long the written estimate is good for. For big jobs you usually want to get estimates from a few different plumbers. Knowing how long your estimate is valid will help you know what your time limit is for making a decision on who to hire.
Make sure any plumber that you hire can handle the type of job you have. There are many aspects to plumbing and many contractors can do almost all of them, but some are better suited to doing work involved in specific areas. If need a plumber for your septic system, get one that specializes in septic systems.
Insulate your pipes properly. If the temperature drops below fifty five degrees, your pipes could freeze. This makes pipes extremely fragile and increases the risk of leaks and damages. The pipes inside your house should not freeze but take a look at a plan of your plumbing system to see if you have any pipes outside of your house.
To compare the quality of your pipes or sewers over time, create a video for documentation purposes. Several months later, make the same video so that you can see if there are any new cracks or holes that require fixing. This can serve as a great way to analyze your infrastructure.
As you can see, solving your plumbing problems yourself can be a satisfying way to save money and take care of your house independently. Next time you have a plumbing problem, you’ll be ready to tackle the issue yourself with the tips you’ve taken from this article.