Plumbing Tips That Will Save You Money

Categories Plumbing

You’ve done it. You’re ready to handle your home’s plumbing maintenance and repair. What perfect timing! You probably have tons of questions on how to start and what to do, but fear not, this article can help you. Listed below are some tips that will help you get started with your plumbing aspirations.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Check your faucets for leaks. Check the knobs and the faucet itself. Hundreds of gallons of water a day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself a lot of money. Leaks can grow over time as well, so avoid a disaster and check all faucets for leaks!

Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.

Keep the drain in your bathtub working well by pouring one cup baking soda into the drain quickly followed by about a cup of white vinegar. Put a rag over the drain afterward, though, to keep the chemicals from coming back up after the reaction. Wait a while, then flush it with boiling water. This procedure should clear the pipes of soap scum and accumulated hair.

You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.

Try to limit the amount of hair that goes down your drains. Hair can become tangled up in the pipe and end up blocking up the them, preventing water from flowing smoothly. Buy a cheap screened drain cover to put over your drain to stop any hair from going down and clean it off regularly.

Believe it or not, it is not a very good idea to use a plunger if your toilet is clogged. Plungers just push whatever is stuck deeper into the drain. Instead, it is a better idea to use a closet auger. It will do a better job and is affordable.

Look online for reviews of the plumbing contractor you are thinking of hiring. If people are not satisfied with the work that the plumber preforms, many times they will go on the internet and post negative reviews. If they are happy with the plumber they will also post positive reviews.

While it is possible to do plumbing activities yourself, it is generally not recommended. If you are not sure of what you are doing, then you must hire a professional. This will help to insure you don’t make a bigger mess of the small problem that your plumbing previously had.

Government agencies can provide information about plumbing contractors. This will allow you to be sure that they are properly licensed and that they have not received a ton of complaints from previous clients. If they don’t have a current license, you don’t want them working for you.

It is important to know the location of the valve that cuts off water to your house. The water meter should be located in its vicinity. Usually toilets, sinks and other fixtures have cut-off valves of their own. Give all family members information about where these valves are located, and show them how to shut them off should an emergency occur.

If you have a water pressure or fill problem throughout the whole house, do not panic. It could be the simplest of solutions. Sometimes the city flushes their systems, breaking up debris and sending it to homes. This requires cleaning drains effectively and strainers in order to resolve the problem.

If you are thinking about becoming a plumber yourself, then you should first try to start out as an apprentice. If you can find a good mentor then you will learn a great deal more from watching and assisting him than you possibly could learn by working on projects alone.

It is important to clean your faucet’s aerator from time to time. Not cleaning it can cause lime buildup, which in turn, could cause water leaks or low water pressure. To clean a aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

Now you should be much more prepared when it comes to plumbing. If you thought that you were ready before, well you should now be an expert! The tips that were given should have provided you some advice that can help you get started with maintaining and fixing your own plumbing.