Plumbing Tips That Every Homeowner Can Use

Categories Plumbing

It is important for your home’s safety and also your wallet that you learn a little bit about plumbing. Perhaps you could improve your skills. Just what are your plumbing skills? If you’re not satisfied with your responses to any of these questions, the following hints and tips can help.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Look closely at your toilets several times throughout the year. Check to see if there are any leaks that you may not have noticed; you can do this by placing five or six drops of food coloring in the tank. If there is a leak, the color will seep into the bowl within half an hour. This process will help you catch a small problem before it gets too out of control.

Wait to give compensation to a plumber until they are finished with their work. You may be required to put some money down before a job is started, but never pay the total cost until you know the job has been completed correctly. It will make you feel better knowing that your problem has been solved before parting with a large sum of money.

If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.

Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

Avoid placing fat, grease, and other oils into your drain. When they cool down, they get hard and that will cause clogs in your sink drains. This can make your garbage disposal run slower. Dispose of your oils in a coffee can or other suitable container instead of your sink.

Have all the plumbing repairs done in one visit. You might be tempted to contact a plumber every time you face a small problem, but if you have problems repaired all at once, you will have time to save money for the fixes. You can save money by only paying a single service call fee instead of ending up with multiple hours being billed from multiple visits.

Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Don’t turn on your sink while using your garbage disposal. It seems like water would help make the disposal function more smoothly, and many people simply assume that this is so, but it is not really the case. In some cases, water can actually cause garbage to become lodged in awkward places, and contribute to future problems.

Before embarking on a plumbing project, make sure that you’re aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you’ll be able to stop the water flow.

When you wash your hands, be sure that you have not left any soap on the faucet handles. What people do not know is that leaving soap on these fixtures can cause fixtures to corrode. Just take two seconds after you are done washing your hands to remove excess soap from the handles.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

If you require the services of a plumber, be sure to check them out prior to hiring them. Some plumbers do not have the experience to deal with certain problems, and may make matters worse. Look up reviews for plumbers, or ask people you know for a recommendation.

In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.

Have you learned a few things about plumbing? Are you more familiar with what type of system you have in your home? Did you develop the skills you need to fix your recurring issues? Do you feel you can now use plumbing diagnostic and repair techniques with your home’s system? Are you knowledgeable on how to use the equipment properly? Since this article was full of such great tips, you can probably confidently answer “yes” to all of these questions.