Plumbing Tips That Are Simple And Easy To Understand

Categories Plumbing

You may not know this, but plumbing is actually a fairly simple concept, when approached correctly. Once you have a good understanding of how everything works, then even the largest projects will appear to be a lot more simple. Read on for more great advice about plumbing in your home.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

Do not fall for the idea that liquid grease can be easily washed down the drain with hot water. While the grease may flow past the initial drain with the water, it does not take much of a temperature change as it moves through your pipes to alter from liquid to solid. The repeat habit of dumping grease in the sink is a sure-fire way to ensure a hard-to-reach clog forming in the future.

To maintain a clean, well-functioning septic tank, it is recommended that you clean it out once every five years. This stop sedimentary particles from accumulating in the tank, and in the worst cases, flooding your home or making the entire system to fail. It will cost some to have the septic tank pumped, but it would cost much more to have it cleaned, repaired or replaced due to sewage back up.

Learning the basics is important with plumbing problems, including how to use the common plumbing tools. Read manuals and do some research on the internet before starting a plumbing project. Plan thoroughly before attempting a repair. Mistakes can be very expensive to fix.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

When running your garbage disposal, always use a lot of cold water. The helps sharpen the blades and clears out the drain mechanism. If you use hot water, any grease in the disposal will liquefy, causing it to accumulate further down the drain, which could cause clogs.

Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.

Do not overload your garbage disposal. If you need to dispose of large items, cut them up into smaller pieces. Also, do not put too much in at a time, put one or two items in and wait a few seconds to dispose of the rest. Overloading your disposal can cause the engine to overheat.

Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out.

Clean out your dryer’s lint filter. This can save you a lot of trouble, including preventing fires. Always check your lint trap for damage, such as holes or tears. This could allow lint to enter your pipes, leading to clogs or other plumbing complications.

Most people run water in their sink when using their garbage disposal. It is popular belief that running water will help the garbage disposal work, but this is mistaken. However, some advice that it can prevent garbage sticking to your disposal, preventing damage. Read your product guide for instructions.

To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double check that there is not a splash waiting for you. Then triple and quadruple check.

In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.

If you have an odor coming from one or more fixtures in your house, it is likely this has to do with the water in water traps. Each fixture has a water trap that is sealed off to prevent odors. If the water evaporates, the odors can surface. Therefore, try adding water to the traps.

In conclusion, there is a lot to know about plumbing, but it all ends up being well connected in the end. Build on any knowledge that you already have and you can take care of just about any home improvement project or plumbing issue that you might be faced with.