Your plumbing system, like you and your family, is an important part of your home. Just like you, it needs to be be taken care of. You need to research all kinds of techniques and equipment and find what works for your plumbing job. These tips below can help you with that.
To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.
It’s a bad idea to makes use of toilet tablets composed of bleach or in the color blue, or in fact any one designed to remove odors. Either kind of toilet tablet might break down obnoxious smells in your toilet, but they might also break down the rubber parts, resulting in malfunction.
Some people have problems with their plumbing system in that the pipes sweat and drip condensation. You do not have to hire a plumber to take care of this nuisance. You can purchase self-adhesive drip tape from your local hardware store. This drip tape will insulate your “sweating” pipes which are dripping with moisture built up from condensation. To make sure the tape sticks firmly, dry the pipe thoroughly before applying the tape.
In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.
Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.
Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face plumbing problems during the winter. This precaution will save time, money and effort.
Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.
Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.
When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.
Check professional listings to find a good plumbing contractor. There you can check on their license to see if it is valid, and also if there is any consumer complaints against the contractor. Only hire contractors with a current, active license. It is a very bad idea to get involved with any contractor that does not maintain a current license.
A plumbing snake is an essential tool in any homeowner’s tool box. Snakes can be used to unclog kitchen and bathrooms drains and toilets when clogged with hardened debris. They are useful as well for grabbing hold of items dropped down sink drains. Snakes come in a variety of sizes for home use and heavier-duty models can often be rented for bigger jobs.
To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.
While it might help to conserve a bit of water to not flush the toilet after every use or only under certain conditions, regularly flushing toilets can help keep water moving in pipes and prevent freezing. The same holds true for letting water run in sinks as well. If you have rarely used bathrooms in your home, make it point to to flush the toilets and run the faucets on a regular basis.
If you work outside for long periods, don’t stay in the sun too long. The heat from the sun can be easy to ignore when you are focused on what you’re doing, but it still can be dangerous.
Always try plunging any clogged toilet or drain before snaking. Snaking can often push problems further down the pipe and make matters worse. A plunger uses nothing but your strength and water pressure to help clear clogs. For more effective plunging, boil some water and pour into the affected drain or toilet to help loosen things up before plunging.
If you have hard water, check intake hoses for washing machines and ice makers often to prevent them from splitting open from buildup. Lime scale remover can be used to remove buildup, but replacing hoses is an economical method as well to take care of the issue. Change out hoses when you change the batteries in your smoke alarms to stop unexpected floods.
Doing your own plumbing ensures that if anything happens to it, you can fix it. Similar to taking care of your family, it is really important that you take care of your plumbing system. So, do yourself a favor and do your research and apply the above tips to your plumbing jobs.