Plumbing Tips And Tricks That Everyone Should Know

Categories Plumbing

You need to have some knowledge of what to look for and expect from doing your own plumbing. You need to know what resources are available to you and who can provide you answers as to what you need for your future plumbing jobs. The tips below can help you with how to start.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

If any water pipe that you have freezes, be sure to turn on the faucet that is closes to the pipe to give the water an exit as the pipe thaws. This can prevent damage to your house because it lets the pressure that is in the pipe out, and keeps it from bursting.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

If water that is not supposed to be there is in the dishwasher, the likely culprit is a kitchen sink hose not properly attached. This hose should lead uphill first and then downhill so the water from the sink and the dishwater never mix.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

If you have grout caught in your line, it’s most likely impossible for you to clean yourself. The grout can be broken in order to send it further down the line. Plastic pipes would have better results than metal. However, you may never be fully rid of the grout without the assistance of a professional.

Check to make sure that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.

To make sure your sump pump will run in an emergency, routinely test it by adding several buckets of water into the sump pit. The pump should turn on, remove the water and turn off with ease. Do this regularly, especially if your sump pump doesn’t run that often, to ensure it will work when needed most.

If you live in an environment where winters get cold, it is crucial that you prepare your pipes for the winter. Leaving pipes as is can cause them to freeze which can create severe plumbing issues. Have your faucet open a little bit when it is really cold to prevent frozen pipes.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

An important plumbing-related decision that must be made these days is the choice between an electric water heater or a gas water heater. In these times with gas costing as much as it does, it is more cost efficient to buy an electric water heater, especially if you have a smaller water heater.

As you have seen in the above tips, there is a lot of knowledge you can acquire before starting to do your own plumbing and it’s this knowledge that can help you with your future plumbing jobs. Do everything you must to find out what you need to get started.