Plumb Easy: Learn How To Solve Your Plumbing Problems

Categories Plumbing

Look no further than this article for the greatest plumbing advice that you will ever find. You are concerned about either current issues that you are having or things that might occur in the future. Read the advice carefully in this article and you will be more than satisfied.

Check the filters in your furnace, regularly. If these filters have not been cleaned or replaced recently, they may become clogged. This will affect how well your furnace is able to work, meaning that you may not have enough heat during the winter. Take this simple step, as soon as the weather starts to become cold.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Use a hairdryer to thaw frozen pipes, after you shut off the water to the house. A hairdryer will gently heat the pipe and thaw the ice without causing significant damage to the pipe. Shutting off the water first means that if the pipe is broken, there will be no rush of water into the house.

Check how well your toilets are flushing. If the handle needs to be played with in order to keep the water from running constantly, or if it needs to be held down several times in order to flush, you may need to switch out some of the parts in your tank. This is not expensive, and it could help reduce your monthly water bill. It could also mean that you avoid the embarrassment of the flushing system breaking when you have visitors!

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Cleaning your in-sink garbage disposal can extend its lifetime significantly. Prevent unsavory disposal odors through regular use of citrus peel, cherry pits and dish detergent.

Do not forget to check the temperature of the water heater in your house, especially if you are planning to leave for an extended period of time. You should keep the temperature no higher than 120 degrees, which will help to reduce energy use and prevent your system from burning out.

Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.

Cover pipes that are outside or in cool areas. Use heat tape to make sure that the pipes are completely covered and insulated. This will prevent frozen pipes in the winter, which can be an expensive problem. Check outdoor pipes for other problems such as leaks and cracks which are better to catch early.

When you wash your hands, be sure that you have not left any soap on the faucet handles. What people do not know is that leaving soap on these fixtures can cause fixtures to corrode. Just take two seconds after you are done washing your hands to remove excess soap from the handles.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.

Take advantage of the information that you can obtain from the department or division of your state government that handles consumer affairs and protection when you are thinking of hiring a plumbing contractor. You should verify that they hold a valid licence and look over any bad feedback filed against them. Unless a contractor’s license is in favorable standing and up-to-date, you wouldn’t want to work with them.

Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.

Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.

Run dishwashers and washing machines at night, or during times when people are not using that much water. This will keep water pressure strong for showers and other things, while making sure that dishwashing and laundry still takes place in a timely manner. It also preserves energy costs and use.

In conclusion, there is a lot to know about plumbing and not all of the advice available is useful. Ideally, this article either provided you with new knowledge or it allowed you to solidify current knowledge. Use this great information today and you will be set up for success with any plumbing project.