If you are a first time homeowner or maybe someone who has just moved out of Mom and Dad’s humble abode, you may not know a lick about plumbing, but there are certain things that you should know. This article will discuss some of them, and you will be more knowledgeable after reading the tips below.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
In order to avoid unsightly and unnecessary clogs in your shower, invest in a drain strainer. This cost-effective addition to your shower will gather your hair before it makes it to the drain, and limit the chances that you will find yourself showering while standing in a clogged up mess.
You should drain all of the water out of the tank of your hot water heater at least once every three to six months. Draining all of the water out of the tank helps to prevent sediment build-up at the bottom of the tank. This sediment can cause the tank to bang or to heat less efficiently.
To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.
Taking preventative measures means you will not have to spend as much on plumbing repairs. Drain clogs are a common plumbing issue and sometimes expensive to repair when they are not addressed promptly. Clogs in drains can be caused by hair, among other things. This can be prevented by using a drain cover or screen to keep the hair from going down the drain. Cleaning hair from the screen is a much easier affair than it would be to get the hair out of the pipe.
Never pour grease down the kitchen-sink drain. This will help you avoid clogs in your kitchen sink. Place grease in a can or other receptacles and dispose of in the trash. Grease that has congealed on pots, and pans can be wiped off with paper towels that can be thrown in the trash.
Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.
Using a snake tool to remove blockages is very easy. Just insert the tool a few inches into the drain, and then turn the handle to change the direction of the snake head and search for blockages. Continue moving down slowly and searching until you find the cause of your blockage.
If you own property where the temperature gets below freezing for an extended amount of time each year, you should make sure that pipes located in unheated areas, such as crawl spaces and garages, are insulated. Pipes that are exposed to the outside elements or those that are prone to freezing, should be protected by heat tape or thermostat-controlled heat cables to prevent them from freezing.
Try to update your internal toilet components from time to time. If you have to hold down the handle for a long time to flush your toilet, you may need to replace a worn piece. This improvement will help to save a lot of money on your water bill during the year.
To avoid hair from accumulating and clogging pipes. Use fine mesh strainers in every drain where hair is washed. Fine mesh strainers can catch the hair and still allow the shower, tub or sink to drain and are also useful in the kitchen to catch and stop small food debris from going down the drain.
Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.
To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.
Before starting a plumbing project be sure to know your pipes. Each pipe has a different use and every municipality has different codes for what pipes can be used for. Making a mistake in this area can be very costly, if you are forced to remove all the pipes from the work you have just completed.
If you are in need of a new bathtub, try to get one that is made of porcelain enamel. These kinds of tubs do require precise and proper care, but their advantage is that they are able to withstand the chemicals that are found in many bathtub cleaning products.
Once or twice a year, drain a few inches of water from your water heater using the valve located at the bottom. The water may be rusty-looking or brown, which is the point of this practice; sediment settles to the bottom of the tank and rests there. Flushing some of this sediment from the tank can extend the lifespan of your hot water heater.
Now that you have read these plumbing tips, you should feel a little more comfortable about looking after that scary hardware that lurks in some rooms of your home. Follow the advice above and you are sure to do the right things when tinkering around with any of the pipes.