Looking For Plumbing Tips? Check Out This Article!

Categories Plumbing

Doing your own plumbing can be an important part of your home improvement. You need to do all of your research, so that you don’t wind up losing a ton of money or destroying your home and your stuff. There are some tips listed here to help you begin with it.

Don’t be afraid to call a professional. Don’t take on jobs to save money, if you aren’t sure how to fix them. Calling a professional plumber saves you money, the experience and know-how can fix your problem sooner and with less fuss.

Pump your septic tank about once every five years, to make sure it is working well. This keeps the tank from developing a buildup of sediment, thereby preventing the septic system from backing up or failing altogether as a result. Hiring a professional to pump out your septic tank is costly, but it is far preferable to the damages that could be incurred if the tank becomes backed-up or inoperative.

It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.

You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.

Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

One of the things that you can do to maximize the security of your home is to seal all of the cracks in your outdoor faucets. Even a tiny crack can intensify as the season progresses and lead to serious problems down the road. Reduce drips and leaks for optimal protection.

Do not, under any circumstances, put lemons down your disposal. Although the lemon smell will give your disposal a great smell, its acid can corrode the metal parts in it. Instead, use products that are made specifically for this use. You can purchase these products at most hardware stores or wherever cleaning products are sold.

Do not attempt to remove grout from your plumbing. Grout can be broken up by yourself, however this generally is only a partial fix. This works best if your pipes are plastic rather than metal. Usually, however, you will need to hire a professional for this issue.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

Check to make sure that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.

If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.

Use a product like BioBen if you are planning to leave your system shut off for a few weeks. Water will still remain in the pipes and could start smelling because it is not moving. This type of product will keep the water from stagnating and from smelling too bad.

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.