Many people attempt to do their own plumbing in order to save money on repair costs. They often fail due to a lack of proper plumbing knowledge or by using the wrong tools for the job. If you would like to do your own plumbing without doing more harm than good, then read the tips in the following article.
To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.
Having your septic tank pumped out on a regular basis will keep it functioning properly. Septic systems can back up when the septic tank builds up sediment. This can even result in the septic system failing altogether. There is a cost to having a company pump out your septic tank. But, a serious backup can cost a lot more if it mean replacing the tank.
Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Make sure that your tool box is ready for any project you are preparing to do. The last thing you want is to be knee deep in a job only to find that you are missing the one tool you need to finish. Be sure to have various sizes of pipe wrenches that can be used to complete any job.
Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.
If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.
If you need a plumber, be certain to do some research first. Certain plumbers may not have the necessary skill or experience to deal with more advanced plumbing jobs, and could make matters worse. Ask around, and check online reviews. Your relatives and friends will likely know a plumber they will recommend.
In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.
Ask before the plumber comes out if they charge for the consultation. In order to quote a project, the plumber has to come out to inspect your particular issue. It is standard to charge for the consultation appointment but the prices can vary wildly. Ask upfront so that you aren’t surprised by the total.
If you are going on vacation, look for individual valves under each of your sinks. Turn off water for each appliance. If you live in an apartment building, you will not be able to shut off your system completely but will have to turn off individual valves to prevent any leak from ruining your apartment.
Always keep a trash bin in the bathroom so that you can dispose of cotton swabs, facial pads, and hair. Do not put these materials in the toilet as they can cause clogs over time and disrupt your water flow. These items will not dissolve or break down when submerged in water.
Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing’s changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.
A lot of people do not know what to do about their plumbing issues so they pay a plumber big bucks! If you own a home, you should do what you can to educate yourself about plumbing so that you are not taking a plumber’s work and word on faith. This also helps you to not get ripped off.
Insulate your pipes properly. If the temperature drops below fifty five degrees, your pipes could freeze. This makes pipes extremely fragile and increases the risk of leaks and damages. The pipes inside your house should not freeze but take a look at a plan of your plumbing system to see if you have any pipes outside of your house.
While you may not be able to tackle every problem that comes up, you can surely feel more confident about dealing with some of the basic stuff. Take any situation step by step, and you will find that it’s not as difficult as you may have thought.