Plumbing can be a very personal type of home improvement. It involves particular needs of an individual’s home. This vast world has so many techniques, equipment, and regulations that it can seem a bit confusing as to where you need to begin. These tips can help you make sense of the confusion.
Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.
To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.
It is important to know how to properly anchor your pipes when it comes to plumbing. This is extremely important to know because not having your pipes well anchored could result in loud noises, leaks, or pressure problems. Call a professional if you are unsure how to take care of it yourself.
If your toilet is clogged, the water level in the toilet is low, and a plunger is not doing the trick, you may be able to resolve the problem by pouring a bucket of warm water into the toilet from waist level or higher. Once the water level is low again, you may repeated this procedure.
If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.
If your sink is letting rusty water out and it will not drain, it is mostly likely because of the biological scum and grease that is built up in the pipes. You need to have your drains professionally cleaned, allowing maximum flow through your drains. Your drains must be open completely.
To keep your garbage disposal working at its best, use plenty of cold water when you turn it on. Cold water keeps blades sharp and allows for smoother disposal. If you use hot water, any grease in the disposal will liquefy, causing it to accumulate further down the drain, which could cause clogs.
If your sewer is backed up, there are things you can do to troubleshoot and clean, including renting equipment like a main line cable. However, often times this does not fully take care of the problem. A professional needs to assess the issue then, using a camera method, and thoroughly cleaning the main line.
Make sure to pour a gallon or two of water into drains that are used infrequently. Not only does this make sure that they are clear when you need them, but can also fill the trap and make sure that unpleasant odors don’t enter your home. Doing this periodically will also help you to catch problems before they become serious.
Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you’ll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.
Do not place items in the toilets that do not belong there. For example, if you are a female, do not throw away sanitary pads or tampons in your toilet. This could cause severe damage to your toilet that could require a plumber, or even worse, a whole new toilet!
If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.
When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.
Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.
Check to make sure that the walls behind the tiles in your bathroom are not soft. Push into the tiles to confirm that the foundation is firm and robust. If the area is delicate and brittle, there is a good chance that water has created damage behind the tiles over time.
If you cannot turn off your main water valve before leaving on vacation, turn off the individual valves for the toilets, sinks, and washing machine. If the valves do not look like they are in good working order, then leave them on and that will be something that you need to have changed when you return.
While plumbing can be a very personal type of home improvement, it does share the main goal of needing to be functional in the home. As you have seen in these tips, there are various approaches, but they are all created around the idea of having a great plumbing system.